Pellet Stove Furnace
Pellet stoves can be used as a secondary heating source or, with proper venting, as a primary heating option. They are available as freestanding units or as fireplace inserts that can give your home the look of an old-fashioned wood-burning fireplace.
The auger transports the pellets out of the hopper into the combustion chamber, where they are burnt and produce heat. Sensors detect the fire and alter the rate of operation to ensure the desired temperature of the room.
1. Energy Efficiency
Pellet stoves make use of a non-toxic, renewable fuel made from compressed sawdust and other substances. They are typically put in landfills, but can be used to provide a clean, efficient source of heat. As a result, they can help homeowners reduce their energy consumption and reduce greenhouse gas emissions. Many pellet stove users report that they have recouped their initial investment in few years through a reduction in their heating bills.
Pellets are extremely compressed and more solid than natural wood, which makes them more efficient to burn. They also produce less creosote buildup than traditional wood-burning fireplaces. They are also packaged in plastic bags to stop moisture from entering and require less frequent cleaning.
Like other heating systems pellet stoves should be properly measured and vented. A skilled technician can assess your venting requirements and space to ensure the most efficient results.
During installation, the hearth is constructed to the right size, and the vent is installed through a pre-cut hole your home's siding. The vent can be positioned through a sidewall or roof depending on your preference and local laws.
Once the hearth and vent are done and the stove is ready to be connected. Some manufacturers provide a remote control that makes starting and maintaining the fire easy and others include sensors that monitor airflow, combustion, flue temperature, and pressure. If the system determines that it needs more or less pellets, it tells the auger to speed up or slow down in line with the need.
Each stove comes with a storage hopper that holds between 35 and 130 pounds of pellets until they're needed. The size of the hopper will determine how often you need to replenish your stove. Larger hoppers allow for longer periods before refills is required. A grille pulls air from the room, passes it over the heat exchanger and blows heated air in the living space through convection. A grate or auger spreads the pellets, and a pan underneath will collect any unburnt ones along with combustion residue.
Although pellet stoves are more efficient than wood-burning stoves, they're not as efficient as natural gas furnaces or electric heaters. The electric components that drive their motorized parts require electricity, which could be problematic during an power outage, even though backup systems are available, such as generators and batteries.
2. fireplacesandstove are extremely efficient, however, like any major heating appliance they require a bit of maintenance to ensure that they function properly. Cleaning your stove and exhaust vent regularly will stop the accumulation of dangerous creosote that could lead to a fire or an explosion that could damage your stove or even your home.
A pellet stove is made up of natural particles that are compressed (such as nutshells, kernels of corn or small pieces of scrapwood) made from wood or other materials. The pellets are introduced into the combustion chamber via an auger powered with electricity. The rate at which the pellets are fed to the burner is controlled by the thermostat you set. This lets the fire keep roaring or lower and even stop according to the temperature you set. The ash will be collected in an empty ash tray underneath the burner. This can easily be removed and disposed.
Pellets are made from byproducts that could have been discarded when processing lumber. They are a renewable resource and emit significantly less particles into the air than traditional wood-burning stoves, which results in a clean burning heat source. The amount of carbon monoxide, carcinogens and other harmful chemicals emitted from pellet stoves is much lower than those with modern wood stoves that are EPA-certified.
These appliances are not required to be vented through a chimney, like is the case with traditional wood stoves. Instead, they should be vented correctly through a wall or any other exterior structure. Pellet stoves are equipped with flue ports on the top or rear of the appliance. They are connected to a ventpipe that extends out the house.
One disadvantage of pellet stoves is that you must purchase or store enough pellets to last the winter season. On average, homeowners of a pellet stove consume three tons of pellets during the course of the winter season at a cost of $200 per ton. The cost can be high however they are much cheaper than purchasing firewood and hauling it for the wood-burning fireplace or stove. You should buy enough pellets to ensure that your stove will run throughout the coldest winter months. Also, you'll must have a space to keep the pellets (preferably dry and cool).
3. Reduce Carbon Footprint
Pellet stoves produce heat using renewable biomass fuel, which reduces the need for finite fossil fuels. This reduces carbon footprints and increases the diversity of energy sources for homes.
The emissions of pellet stoves are much lower than woodstoves, even newer EPA-certified ones. The emissions from pellet stoves are considerably lower than ones from gas furnaces. Pellets are made from sawdust or bark, as well as other lumber remnants. They can also include soybeans, corn, or agricultural waste. When they are burned, they emit less particulates, which can cause respiratory problems and allergies, carcinogens and nitrous dioxide.
The feed system is the major difference between pellet stoves and wood stove. Pellet stoves have hoppers that hold the pellets. When the thermostat or sensors suggest that the room requires heating, the auger is turned. The pellets are then placed in the combustion chamber and are burned to produce heat. The combustion chamber moves through a heat exchanger which transmits the heat to the blower before releasing it into the room. This process results in low emissions and no creosote accumulation.
After the hopper is emptied, the ash is removed by a cyclone and is deposited in an ash bin. The stove is equipped with a fan that circulates the warm, fresh air into the room. The majority of pellet stoves require little maintenance and have a large viewing space for you and your family members to enjoy the flames.
The quality of pellets is the most important factor that influences the emissions of pellet stoves. Pellets that are not of the highest quality produce more emissions. When selecting your pellets, ensure that they're certified to meet specific standards and don't contain other ingredients like petroleum products or urea. Find a business with a warranty and will replace or repair parts in the event of an issue. Some states offer homeowners tax credits in the event that they decide to go even greener. This is a great way to reduce the initial cost of this type of stove and make it easier to install.
4. Reduced Noise
Pellet stoves emit very little emissions or smoke compared to fireplaces that burn wood. A fan is employed to spread heat more evenly across the room. This feature is one reason pellet stoves need less maintenance than wood stoves. While wood stoves require regular cleaning of particulates and chemicals to avoid deterioration, pellet stoves can be cleaned using the use of a vacuum cleaner made of metal.
Many manufacturers have designed their stoves so that they are easy to install and operate as well as maintain. They come in various styles that match the interior decor of your home. Some include a programmable thermostat remote control, as well as WIFI app so you can monitor and manage your stove from anywhere in the world.
Most pellet stoves come with an enormous fuel hopper, which can hold between 35 and 130 pounds of pellets. The pellets are then pumped into the combustion chamber via an auger. The speed at which pellets are fed to the burner determines how hot the flame is as well as the amount of heat it produces. The hopper can be filled with hardwood pellets (from dense wood species like oak and hickory) or softwood pellets (from pine and fir). Many stoves can also make use of alternative biomass pellets such as those made of corn or switchgrass which are environmentally friendly alternatives.
Because pellet stoves use an environmentally friendly fuel, they generate less smoke than conventional wood-burning fireplaces and require less maintenance. They don't require chimneys and are an ideal option for retrofits or new construction.
Pellet stoves do not require regular cleaning of creosote or other chemical like wood stoves. They just require periodic inspections to ensure their proper operation and maintenance. This could include periodic cleaning and inspection of the ash or "clinker" as well as the motors and fans, depending on the model. Your appliance dealer can explain the correct procedures for your brand and model. He can also help you find the correct fuel for your stove and provide information on storage and safety.